Instruction
- File Preparation:
- Import your design file into the CNC software
- Configure the tool paths and set the cutting parameters
- Put on all required PPE
- Machine Set Up:
- Install the appropriate cutting tool and secure it in the spindle
- Load the material to be cut and secure it properly
- Job Cut:
- Set the correct parameters for the material, including feed rate and cutting depth
- Calibrate the machine by setting the origin point (zero point) of the material
- Start the CNC milling program and monitor the machine as it operates
- Do not leave the machine unattended while it is running
- Make adjustments if necessary based on machine feedback and cutting performance
- Finishing:
- Once job is complete, turn off the machine
- Remove the finished part and clean up any debris from the machine
- Inspect the workpiece for accuracy and completeness
- Clean up work area
Required Personal Protective Equipment (PPE)
- Eye Protection: Safety glasses
- Ear Protection: Hearing Protection Earmuffs
- Respiratory Protection: Dusk mask / respirator
- Body Coverings: None required
- Shoes: Non-slip footwear that covers the entire foot and has a level bottom is recommended
Engineering Controls
- Dust collection system to minimize particles
- Emergency stop button within easy reach
- Proper lighting to ensure clear visibility of the work area
- No loose clothing, clothing draw cords, gloves, scarves, neckties, rings, bracelets, or other jewelry which may get caught in the machine should be worn.
- Pull back long hair, including beards.
- Ensure those in the room with you wear proper apparel as well.
Emergency Response
- Injury: Seek immediate medical attention
- Eye Injury: Seek immediate medical attention
- Fire: In case of fire, use a fire extinguisher suitable for electrical fires and evacuate the area.
