Instruction
- Preparation:
- Complete required orientations and sign into the metal shop log
- Put on all required PPE
- Check the blade for correct installation and tension
- Set the blade guard no more than ¾” above the material
- Operation:
- Position the material on the table, ensuring it remains in contact.
- Turn on the saw and wait for full speed before cutting.
- Feed the material slowly, keeping hands away from the blade.
- Finishing:
- Turn off the saw and wait for the blade to stop
- Remove the material and clean the area
Required Personal Protective Equipment (PPE)
- Eye Protection: Safety Glasses and Full Face Shield
- Ear Protection: Hearing Protection Earmuffs
- Body Coverings: None required
Engineering Controls
- Blade guards
- Proper lighting
- Dust collection system
Emergency Response
- Injury: Seek medical attention immediately.
- Eye Injury: Flush eyes with water for at least 15 minutes, seek immediate medical attention.
- Fire: Use a fire extinguisher suitable for electrical fires and evacuate the area if necessary.